Filter
Top Products
13·3
Setting method (value, example)
(Operations when a slave station error occurs)
• Remote I/O operation (communication) stops
• The PC continues operation. (Mode 1)
• Only normal slave stations will continue
operation (communication).
• The PC continues operation. (Mode 2)
• Remote I/O operation (communication) stops
• The PC continues operation. (Mode 0)
• Remote I/O operation (communication) stops
• The PC continues operation. (Mode 1)
• Only normal slave stations will continue
operation (communication).
• The PC continues operation. (Mode 2)
• Remote I/O operation (communication) stops
• The PC continues operation. (Mode 1)
• Only normal slave stations will continue
operation (communication).
• The PC continues operation. (Mode 2)
• Remote I/O operation (communication) stops
• The PC also stops operation. (Mode 0)
• Remote I/O operation (communication) stops
• The PC continues operation. (Mode 1)
• Only normal slave stations will continue
operation (communication).
• The PC continues operation. (Mode 2)
001(8)
002(8)
004(8)
005(8)
006(8)
011(8)
012(8)
014(8)
015(8)
016(8)
(Communication
method)
Asynchronous
Synchronism
Asynchronous
Synchronism
000001
000000
: Setting is necessary (1/6)
Address(8)
Set contents
Fix
Manual
JW-PC
ZW-PC
Remote I/O
operation mode
No. of slave
station
connected
(1 to 63 sets)
(Decimal, bytes)
In case of 30 sets 030(D)
13-3 Parameter memory table
(1) JW-20CM
Remote I/O
• Initial value of the address 000000, 000001(8) are 00(H).
Fix
Manual