Filter
Top Products
C C AU TION–I NTER AC TIV E PEN DI SPLA Y
l Avoid excessive vibration of the interactive pen display orthe tethered pen. Hitting or
dropping the interactive pen display can damage the protective plate or other components.
l Do not touch the screen with sharp ormetallic objects that could scratch the screen.
l Use only a damp cloth to clean the screen. Do not apply glass cleaner, organic solvents
(such as alcohol), or even a mild detergent to the screen. If you use these cleaners, you may
damage the screen’s finish or the unit’s electronics. Using such cleaners also voids the
warranty.
l Use only a damp cloth or acloth dampened with very mild detergent to clean the unit casing
or tethered pen. Do not apply paint thinner, benzene, alcohol or other solvents to the casing.
If you use these cleaners, you may damage the finish. Using such cleaners also voids the
warranty.
l Use only the power adapter that came with the interactive pen display. Other adapters will
not work properly, can damage the interactive pen display, and can create a fire hazard.
Using a different power adapter also voids the warranty.
l Use only the tethered penthat came with the interactive pen display. Pens or styluses from
other products can damage the screen. Also, they will not work with the DViT™
(DigitalVisionTouch) technology.
l Do not use the interactive pen display in a facility control system or any other environment
that requires extremely high reliability; the interactive pen display can interfere with or cause
other electronic devices to malfunction, orother devices can interfere with or cause the
interactive pen display to malfunction. Where use is prohibited, turn off the interactive pen
display to prevent the possibility of it interfering with or causing other electronic devices to
malfunction. SMART does not accept any liability for direct or consequential damages.
l If you transport the interactive pen display over a distance, we strongly urge you to
completely repackage it using the original carton. We designed this packaging with optimal
shock and vibration protection. If the original carton is no longer available, pack all
components with as much padding as reasonably possible to protect the components from
excessive vibration or shock. Do not include loose components in the packaging that could
mark, scratch or otherwise damage the screen during the journey.
l Put the interactive pen display down carefully to ensure you do not damage the buttons.
l
Do not place the interactive pen display ona surface that will mark, scratch or damage the
screen.
Do not place sharp orheavy objects on the interactive pen display.
IM POR TA NT INF ORM AT ION
ii