Filter
Top Products
D
ISCOVERY
I-11
The ipnode= entity of [discover] in NETMGR.INI is not correct!
Cause: The content of ipnode= entity is not correct; it should be ON or OFF.
Action: Use a text editor to edit NETMGR.INI.
The ipxnode= entity of [discover] in NETMGR.INI is not correct!
Cause: The content of ipxnode= entity is not correct; it should be ON or OFF.
Action: Use a text editor to edit NETMGR.INI.
The nwserver= entity of [discover] in NETMGR.INI is not correct!
Cause: The content of nwserver= entity is not correct; it should be ON or OFF.
Action: Use a text editor to edit NETMGR.INI.
The path= entity of [bitmaps] in NETMGR.INI is not specified.
Cause: Cannot find the path information for bitmap files.
Action: Use a text editor to edit NETMGR.INI.
The protocol= entity of [discover] in NETMGR.INI is not supported.
Cause: The content of protocol= entity is not correct; should be UDP, IPX or ETHERNET.
Action: Use a text editor to edit NETMGR.INI.
The retry value should be in the range of 1 to 10!
Cause: The retry value is out of range.
Action: Use a text editor to edit NETMGR.INI.
The scan value should be in the range of 1 to 10!
Cause: The scan value is out of range.
Action: Use a text editor to edit NETMGR.INI.
The total= entity of [device] in NETMGR.INI is not specified.
Cause: The total= entity must be specified.
Action: Use a text editor to edit NETMGR.INI.
The value of repoll in NETMGR.INI is not in the range of 1 to 10!
Cause: The repoll value is out of range.
Action: Use text editor to edit NETMGR.INI
There are two nodes with the same IP address - %%!
Cause: An IP address has been duplicated.
Action: Write down the MAC addresses for troubleshooting.