Filter
Top Products
B
ACKUP
5-15
Options Menu Commands
Setup
Click on Setup in the options menu to open a dialog box with the following commands:
Download Same-numbered Version
Check the Download same-numbered version check box to download firmware with the same version number as
the existing firmware in the switch. You may wish to do so if this version of the firmware has been previously
loaded into the switch and there have subsequently been problems with this firmware.
Download Older Version
Check the Download older version check box to download op-code with an older version number than the existing
firmware in the switch.
Default Polling
This is the number of times per second that Batch Upgrade will issue SNMP query messages messages see
Broadcast.
Default Retries
This is the number of times that Batch Upgrade will issue SNMP query messages messages see Broadcast.
Backup
Backup is a tool that used to backup the latest version of the configuration file on a network device. It replaces the
conventional way used to backup files by setting SNMP commands. Backup can load devices from a Map file
(Created by EliteView) or an exported file (*.dbf), discover and collect lots of networking devices located in
different places. Users can use simply Drag and Drop operations to configure backup information. After clicking
the Backup or Start Schedule speed button (or using the Utilities menu) the program will automatically process
these devices in turn.
File Menu Commands
Load From Map
Map View can load device from a Network map file.
Refresh File List
Refresh File List refreshes the files in the File View tab.