SMC Networks 6.20 Switch User Manual


 
2-1
C
HAPTER
2
I
NSTALLATION
This chapter describes setup procedures for EliteView network management software. EliteView can manage any
of SMC’s network devices via standard and private MIB definitions; and also manage any third-party device that
has a resident SNMP agent via standard MIB definitions. Installation of EliteView software designed to manage
specific devices is covered in the corresponding manuals.
(Refer to “Additional References” on page iii.)
Installation for EliteView
EliteView can be readily installed on most Windows-compatible personal computers. The EliteView setup
program will guide you through a step-by-step procedure.
System Requirements
Before installing EliteView, please review these minimum computer and network system requirements for a
“dedicated” network management system (NMS).
Hardware:
PC with 1.6 GHz Pentium IV or better
Minimum 256MB memory
Hard disk with a minimum of 200 MB free disk space
SVGA adapter and display
•Mouse
10/100/1000Mpbs Network adapter
Software:
Microsoft Windows 95
Microsoft Windows 98
Microsoft Windows NT 4.0
Microsoft Windows 2000
Microsoft Windows XP