Filter
Top Products
Check
Possible remedy
Are you trying to feed paper
You can only feed paper in this way when the printer is
using the front panel buttons
off-line. Set the printer off-line and then feed paper.
while the ONLINE indicator
is illuminated?
Is
the paper too thick?
I
There are
limitsto the thickness ofpaperthatcanbe fed
in this way. Try using thinner paper.
If the ASF is not operatingor is not feedingpaper correctly,check the
following:
Check
Possible remedy
Has the ASF option been
Select this option.
selected with the EDS
switch?
Is the release lever set to the
The release lever should be set to the single-sheet
~ position?
position.
Is the ASF correctly
Make sure that theASF improperlyseatedontheprinter.
mounted?
Is paper caught up near the
Stopprinting, remove thejammed sheet (youmay have
print head?
to remove the ASF for this), and continue.
Are the left and right guides
If the left and right guides are too close together, the
too close together?
paper will not feed smoothly. Move them alittle further
apart to allow the paper to feed freely.
Is there toomuchpaperinthe
The ASF’Spaper feed hopper and stacker can hold 50
paperfeedhopperorstacker?
sheets each. Make sure that there is no more paper than
this in either the hopper or stacker.
Was thepaper fanned before
If this is not done, paper jams may occur. Remove the
being fed into the ASF?
stack of paper from the ASF and fan it before reinsert-
ing.
Has the paper been used al-
Only new, uncreased paper should be used with the
ready or is it creased?
ASF.
Are you hying to feed paper
Youcan only feed paper in this way when theprinter is
using the front panel buttons
off-line. Set the printer off-line and then feed paper.
while the ONLINE indicator
is illuminated?
Is the paper too thick or too
There are limits to thethickness ofpa~r that can be fed
thin?
in this way. Try using different paper.