Filter
Top Products
BIDIRECTIONAL TEST/ADJUSTMENT MODE
Thismodeis used to adjustthe alignmentof theprint head on successive
bidirectionalpasses.Aftera periodofsomemonths,yourprintermaywork
itselfout of alignmenton left and rightprintingpasses.This willbe most
evidentin NLQprinting.Thismodewillprobablybe usedvery rarely.
1. Turn the printeroff and then turn it on againwhileholdingdown the
(
,,F~AF.~~cT
) and (
ON
LINE
)
buttons.The printer will then print
somethinglikethe following:
2. The printer will feed the paper forwards and backwardsduring this
operation,allowingyouto viewthepaperfor optimumalignment.
3. To adjustthepnnting,usethe( ..A
S, T & ,.[,1
)and (PAPERFEED) buttons.
The(
sEJAc#~(.:I
)button will move the second pass to the left. The
(PAPERFEED) buttonwillmovethe secondpassto the right.
,:~
CURRENT
o:
//////////////////////////////////////////////////
—-CURRENT –1 :
CPAPEB FEED
///// ///////////////////////////./ ///////!/////////
*CURRENT
o :
l//llllllll///ll/l/////////////////’///////////////
4. Whenthetwopassesarealignedwitheachotherto formonecontinuous
line,the bidirectionalalignmenttestis completed.
5. To savethecorrectedvalueandto exitfromthismode,pressthe_
button.
, ~~ÿÿÿÿÿÿ
F
,1!INC.h**
CURRENT
c:
//////////////////////////////////////////////////
CURRENT 1 :
//////////!///////////////////////////////////////
~
CURRENT
o:
/////////////////////////////////////////////////’/
,+ ,
NOTE:If you want to print NLQ charactersunidirectionally,press the
CPAPERFEED) buttonseveraltimes until the “UNI” messageap-
pears.
40