Filter
Top Products
8.
9.
Adjustthespacingofthetractorunitsbyslidingthemalongthebar,using
the clamp lever at the back of each unit to release and lock them in
position.Whentheclampleverisup,theunitis released,andwhenit is
down,theunitis locked.
Nowclosethetractorcovers,againmakingsurethatthepaperholesare
alignedwiththepinsonthetractorunits.Iftheyarenotalignedproperly,
you.willhaveproblemswithpaperfeeding,possiblyresultingintearing
andjammingof the paper.
10.Turnonthepowerusingtheswitchlocatedatthefrontoftheprinter.The
printerwillbeep,indicatingthat the paperis not yet fullyloaded.The
orange
POWERindicatorwill alsoflashto confirm this.
11.Nowpressthe C
=L’A=dEcT
) button.Thepaperwillbefed and’adjusted
past theprinthead to apositionreadyforprinting.
12.If youwanttosetthepaperto adifferentposition,setthepnnteroff-line
by pressingthe(
ON
LINE
)
button,then set the paper by using the
micro-feedfunction.(Fordetails,referto Chapter2.)
13.Replacethe rear cover, and mountthe paper guide in the horizontal
positionshownin Figure1-14,so thatit willseparatetheprintedfrom
the unprintedpaper.
cover
I
Figure 7-14. Mounting the paper guide for fanfold forms
14