Filter
Top Products
Front tab
der
Spr
Hea
Figure 7-1. Replacing the print head
6. Disengagethecablefromtheconnectorholdingit down,then remove
theprinthead.
7. Plugthe cableintothe connectorofthe newprinthead.
8. Placethe newprintheadon its support,seatingit on the twopins.
9. Fastenthe printheaddownwiththe two screws.
10.Remountthecolorribbonholderwithcaretopositionthespringandthe
fronttab correctly.
11.Replacetheribboncartridgeandtopcover,andplugthepowercordback
in.
114