Filter
Top Products
Maintenance
110 Avaya CMS Sun Fire V880/V890 Installation, Maintenance, and Troubleshooting May 2006
Disk partition values
During the disk partitioning procedure, you must enter the size of each partition. Since disk
models change often, see the software installation, maintenance, and troubleshooting
document for your current CMS release to verify the correct disk partitioning values.
Boot disks: The following table lists the boot disk drives. These partition sizes are entered in
Gigabytes (gb).
Disk Partition ID tag Permission
flag
Starting cylinder Value
146-GB
(V890)
0 root wm 0 4gb
1 swap wu 413 1gb
2
1
1. The value that is displayed for the backup partition shows the size of the disk drive. If the disk drive
you are partitioning does not closely match the size of the disk you are partitioning (for
example, 68-GB for a 73-GB disk), you have a nonstandard disk. Escalate the issue to Avaya
technical support.
backup wm Use the default values for partition 2.
3 un wm 517 3gb
4 un wm 827 2gb
5-7 un wm Do not enter a value for partitions 5
through 7. These values are
populated automatically when the
boot disks resynchronize during the
restore procedure.
73-GB
2
(V880)
2. Sun identifies these disk drives as 73-GB, but the format command shows them as 72-GB.
0 root wm 0 4gb
1 swap wu 825 1gb
2
1
backup wm Use the default values for partition 2.
3 un wm 1032 3gb
4 un wm 1651 2gb
5-7 un wm Do not enter a value for partitions 5
through 7. These values are
populated automatically when the
boot disks resynchronize during the
restore procedure.