Filter
Top Products
Maintenance
134 Avaya CMS Sun Fire V880/V890 Installation, Maintenance, and Troubleshooting May 2006
Maintaining CPU/Memory boards
This section describes how to replace or add memory modules and CPU/Memory boards.
This section includes the following topics:
● CPU and memory configurations on page 134
● Checking the current memory and CPU configuration on page 135
● Shutting down the system on page 136
● Removing a CPU/Memory board on page 137
● Replacing memory on page 138
● Installing a CPU/Memory board on page 140
● Restarting the system on page 143
!
WARNING:
!
WARNING: You must wear an ESD wrist strap when installing or removing hardware
components to prevent electrical discharge that can damage the system.
CPU and memory configurations
The minimum memory configuration of the V880 is one CPU/Memory board that has two
processors and 4-GB of memory. The V880 computer can be upgraded to a total of four CPU/
Memory boards, with a maximum memory of 16-GB.
The minimum memory configuration of the V890 is one CPU/Memory board that has two
processors and 8-GB of memory. The V890 computer can be upgraded to a total of two CPU/
Memory boards, with a maximum memory of 16-GB.
!
Important:
Important: The CPUs in all memory boards must match. You cannot, for example, mix a 900
MHz CPU with a 1.2 GHz CPU, or an UltraSPARC III CPU with an UltraSPARC IV
CPU.