Filter
Top Products
Maintaining disk drives
Avaya CMS Sun Fire V880/V890 Installation, Maintenance, and Troubleshooting May 2006
113
3. Enter:
partition
The partition menu is displayed:
4. At the partition> prompt, enter:
print
The default partition table is displayed. The table for a 146-GB FC-AL data disk will look
similar to the following example:
5. Partition the disk by completing the following Steps a through e for all partitions specified in
the Disk partition values
on page 110.
a. At the partition> prompt, enter the partition number from the table. For example:
The system prompts for the partition ID tag.
PARTITION MENU:
0 - change `0' partition
1 - change `1' partition
2 - change `2' partition
3 - change `3' partition
4 - change `4' partition
5 - change `5' partition
6 - change `6' partition
7 - change `7' partition
select - select a predefined table
modify - modify a predefined partition table
name - name the current table
print - display the current table
label - write partition map and label to the disk
!<cmd> - execute <cmd>, then return
quit
partition>
Current partition table (original):
Total disk cylinders available: 14087 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 root wm 0 - 412 4.01GB (413/0/0) 8405376
1 swap wu 413 - 516 1.01GB (104/0/0) 2116608
2 backup wm 0 - 14086 136.71GB (14087/0/0) 286698624
3 unassigned wm 517 - 826 3.01GB (310/0/0) 6309120
4 unassigned wm 827 - 1033 2.01GB (207/0/0) 4212864
5 unassigned wm 1034 - 1240 2.01GB (207/0/0) 4212864
6 unassigned wm 1241 - 1447 2.01GB (207/0/0) 4212864
7 unassigned wm 1448 - 14086 122.66GB (12639/0/0) 257228928
partition>
partition> 0