Filter
Top Products
Troubleshooting
202 Avaya CMS Sun Fire V880/V890 Installation, Maintenance, and Troubleshooting May 2006
2. Enter:
./log_error -e 30001 -d "test alarm"
This sends a test alarm.
3. Enter:
./alarm_view -p TEST -a TEST_ALARM
This will display the test alarm.
4. Enter:
./alarm_resolve -p TEST -a TEST_ALARM
This resolves the test alarm.
5. Enter:
tail -f aom_log
The AOM log file is displayed.
6. If you change an AOM parameter, such as the product ID or the telephone number, you
must turn AOM off and back on again to recognize the new parameters. These parameters
are in /opt/cc/aot/data/admin/sysSetup.cfg file. Be sure to set the port to value
1 for ttya.
7. If the /opt/cc/aom/data/log file has the message "aom cms alarm is
disabled", enter:
export PRODUCT_TYPE=TEST
This enables the alarm.