Sun Microsystems V880 Server User Manual


 
Troubleshooting
164 Avaya CMS Sun Fire V880/V890 Installation, Maintenance, and Troubleshooting May 2006
Using the cfgadm command
The cfgadm command displays diagnostic information about CPU/Memory boards, SCSI
controllers, and PCI cards.
To display this diagnostic information, enter:
cfgadm
The following is an example of the results for the computer.
c0 shows the status of the internal SCSI controller.
c2 and c3 show the status of the SCSI controllers on the Dual Ultra320 SCSI card.
pcisch0 through pcisch3 show the status of the PCI slots. In this example, the following
cards are installed:
-
Slot 0 - Dual Ultra320 SCSI card
-
Slot 1 - Graphics card
-
Slot 8 - Quad GigaSwift Ethernet card
Ap_Id Type Receptacle Occupant Condition
c0 scsi-bus connected configured unknown
c2 scsi-bus connected configured unknown
c3 scsi-bus connected unconfigured unknown
pcisch0:hpc1_slot0 mult/hp connected configured ok
pcisch0:hpc1_slot1 vgs8514/hp connected configured ok
pcisch0:hpc1_slot2 unknown empty unconfigured unknown
pcisch0:hpc1_slot3 unknown empty unconfigured unknown
pcisch2:hpc2_slot4 unknown empty unconfigured unknown
pcisch2:hpc2_slot5 unknown empty unconfigured unknown
pcisch2:hpc2_slot6 pci-pci/hp connected configured ok
pcisch3:hpc0_slot7 unknown empty unconfigured unknown
pcisch3:hpc0_slot8 unknown empty unconfigured unknown
usb0/1 usb-mouse connected configured ok
usb0/2 usb-kbd connected configured ok
usb0/3 unknown empty unconfigured ok
usb0/4 unknown empty unconfigured ok