Filter
Top Products
WS 2000 Wireless Switch System Reference Guide6-2
Configuring Administrator Access
The WS 2000 Network Management System allows users to log in to perform administration tasks. The switch administrator
can change any settings within the WS 2000 Network Management System. The default login name for the switch
administrator is “admin” and the initial password is “symbol”.
To configure which interfaces the administrators can access the user interface or to change the passwords of the
administrators, select System Configuration --> WS 2000 Access from the left menu.
Selecting the Type of Admin Access
The WS 2000 Network Management System runs from a standard Web browser. Any individual on an enabled subnet or
over the WAN can access the log screen by specifying one of the IP addresses associated with the user interface. The WS
2000 Access screen allows the administrator to restrict access from different locations. By selecting the appropriate
checkboxes, the administrator can allow or disallow specific types of access from the WAN port or from the LAN subnets.
When connected to the switch using multiple methods, i.e. SSH and HTTP, saving the
configuration using one method will cause a disconnect from the other method.
Choose the types of access to allow by checking the associated checkbox.
Access
Port
Description
Applet HTTP
80
Allows administrator access to the WS 2000 Management System through a standard http
web browser communication.
Applet HTTPS
443
Allows administrator access to the WS 2000 Management System through a https (secure)
connection from a web browser.
CLI TELNET
23
Allows administrator access to the wireless switch through TELNET. Allows the administrator
to access the switch through the command line interface.