Filter
Top Products
Switch Administration 7-25
3. Click the Apply button to save the trap settings.
4. It is necessary to tell the switch where to send the notifications. Make sure to set the trap configuration to indicate
where to send the notifications.
MU unassociated
An MU becomes unassociated with (or gets dropped from) one of the
switch’s WLANs
MU denied association
An MU cannot associate with the switch-managed network, for example due
to an absent or incorrectly specified MAC address on a WLAN Security
screen.
MU denied
authentication
An MU is denied authentication on one of the switch’s WLANs, which can be
caused by the MU being set for the wrong authentication type for the WLAN
or by an incorrect key or password.
AP Traps
AP adopted
Any of the switch’s Wireless Local Area Networks (WLANs) adopts an AP.
AP unadopted
Any of the switch’s WLANs unadopts (or drops) an AP.
AP denied adoption
Check this box to generate a trap when any of the switch’s WLANs deny the
adoption of an AP.
AP detected radar
(802.11a only)
An 802.11a AP 300 Access Port detects radar during its startup or ongoing
radar scans. This trap only applies to the 802.11a radio of an AP 300 Access
Port operating with Dynamic Frequency Selection and Transmit Power
Control (DFS/TPC).
Rogue AP
Check this box to generate a trap when a rogue (unauthorized) access port
(AP) is detected. Several methods for rogue AP detection are employed by
the switch. The detection process is non-disruptive and will not affect the
performance of the switch. The detection functionality is greatly enhanced
when the Approved AP list is filled out on the AP List screen under Rogue AP
Detection.
Trap
Category
Trap Name Generates a Trap whenever…