Filter
Top Products
WS 2000 Wireless Switch System Reference Guide6-8
Up to 10 proxy servers are supported.
1. Enter a value between 3 and 6 in the Retry Count field to indicate the number of times the switch attempts to reach a
proxy server before giving up.
2. Enter a value between 5 and 10 in the Timeout field to indicate the number of elapsed seconds that will cause the
switch to time out on a request to a proxy server.
3. Use the Add button to add a new entry based upon a domain suffix to the Proxy Server Settings area. Then fill in the
following information for each entry:
4. Click Apply to save changes.
To delete a server row, select the row corresponding to that entry and click the Del (Delete) button.
If you are using a proxy server for RADIUS authentication, the Data Source field on the Radius
Server screen (Configuring the RADIUS Server) must be set to Local. If it is set to LDAP, the
proxy server will not be successful when performing the authentication.
Suffix
Enter the domain suffix (such as myisp.com or mycompany.com) of the users to be sent to
the specified proxy server.
RADIUS Server IP
Enter the IP address of the RADIUS server that will be acting as a proxy server.
Port
Enter the TCP/IP port number for the RADIUS server that will be acting as a proxy server.
The default port is 1812.
Shared Secret
Set a shared secret to be used for each suffix that will be used for authentication with the
RADIUS proxy server.