Filter
Top Products
Administrator and User Access 6-7
1. Fill out the LDAP Configuration area to allow the switch to work with the LDAP server. Consult with the LDAP server
administrator for details on how to set the values for the fields in this screen.
2. Click Apply to save your changes.
Setting Up a Proxy RADIUS Server
The WS 2000 Wireless Switch provides the capability to proxy authentication requests to a remote RADIUS server based
upon the suffix of the user ID (such as myisp.com or company.com). Select [User Authentication] --> Radius Server -->
Proxy to go to the RADIUS Proxy Configuration screen is where the definitions of proxies are made.
LDAP Server IP
Enter the IP address of the external LDAP server that will be acting as the data source
for the RADIUS server. This server must be accessible from the WAN port or from an
active subnet on the switch.
Port
Enter the TCP/IP port number for the LDAP server that will be acting as a data source.
The default port is 389.
Login Attribute
Enter the login attribute used by your LDAP server for authentication. In most cases,
the default value in this field should work.
Password Attribute
Enter the password attribute used by your LDAP server for authentication.
Bind Distinguished Name
Specify the distinguished name to bind with the LDAP server.
Password
Enter a valid password for the LDAP server.
Base Distinguished Name
Specify a distinguished name that establishes the base object for the search. The
base object is the point in the LDAP tree at which to start searching.
Group Attribute
Specify the group attribute used by your LDAP server.
Group Filter
Specify the group filters used by your LDAP server.
Group Member Attribute
Specify the Group Member Attribute to be sent to the LDAP server when
authenticating the users.