Filter
Top Products
WS 2000 Wireless Switch System Reference Guide5-30
The WS 2000 Wireless Switch only reports rogue APs. It is up to the administrator to change
security settings or disrupt the rogue AP’s connection.
Setting SNMP Traps for Rogue APs
It is also possible to set a trap for a rogue AP.
1. Go to [System Configuration] --> SNMP Access --> SNMP Traps from the navigation menu.
2. Check the Rogue AP box (in the lower right area of the screen) to generate a trap when a rogue (unauthorized) access
port (AP) is detected. The detection process is non-disruptive and will not affect the performance of the switch.
The detection functionality is greatly enhanced when the Approved AP list is filled out on the AP List screen under Rogue
AP Detection.