Filter
Top Products
WS 2000 Wireless Switch System Reference Guide3-6
The Access Overview Table
In the overview table, each of the rectangles represents a subnet association. The three possible colors indicate the current
access level, as defined, for each subnet association.
The Access Exception Area
In the lower half of the screen, the access is controlled by specific rules that control the protocols that are allowed or denied
between the two subnets or the subnet and the WAN. All rules are added to the exception table. The Allow or Deny menu
item applies to all entries in the table. There are two ways to add entries (access rules) to the table. The first is by checking
the checkboxes for specific protocols (on the left). The second is by adding rules for specific port numbers by clicking the
Add button and filling in the necessary information. A combination of the two methods can be used to add multiple entries
to the table.
You can allow or deny communication through specific protocols using the following process:
Color Access Type Description
Green Full Access
No protocol exceptions (rules) are specified. All traffic may pass between these two
areas.
Yellow Limited Access
One or more protocol rules are specified. Specific protocols are either enabled or disabled
between these two areas. Click the table cell of interest and look at the exceptions area
in the lower half of the screen to determine the protocols that are either allowed or
denied.
Red No Access
All protocols are denied, without exception. No traffic will pass between these two areas.