Filter
Top Products
WS 2000 Wireless Switch System Reference Guide1-4
Hardware Overview
The WS 2000 Wireless Switch provides a fully integrated solution for managing every aspect of connecting wireless LANs
(WLANs) to a wired network. This wireless switch can connect directly to a cable or DSL modem, and can also connect to
other wide area networks through a Layer 2/3 device (such as a switch or router). The switch includes the following features:
• One WAN (RJ-45) port for connection to a DSL modem, cable modem, or any other Layer 2/3 network device.
• Six 10/100 Mbit/sec. LAN (RJ-45) ports: four ports provide 802.3af “Power over Ethernet” (PoE) support; the other two
do not provide power.
• Each port has two LEDs, one indicating the speed of the transmission (10 or 100 Mbit/sec.), the other indicating whether
there is activity on the port. The four LAN ports with PoE have a third LED that indicates whether power is being
delivered over the line to a power device (such as an Access Port). (See the WS 2000 Wireless Switch LED explanation
for more information on the meaning of the different state of the LEDs.)
• A DB-9 serial port for direct access to the command-line interface from a PC. Use Symbol’s Null-Modem cable (Part No.
25-632878-0) for the best fitting connection.
• A CompactFlash slot that provides AirBEAM
®
support.
Technical Specifications
Physical Specifications
• Width: 203 mm
• Height: 38 mm
• Depth: 286 mm
• Weight: 0.64 kg
Power Specifications
• Maximum Power Consumption: 90-256 VAC, 47-63 Hz, 3A
• Operating Voltage: 48 VDC
• Operating Current: 1A
• Peak Current: 1.6A
Environmental Specifications
• Operating Temperature: 0ºC to 40ºC
• Storage Temperature: -40ºC to 70ºC
• Operating Humidity: 10% to 85% Non-condensing
• Storage Humidity: 10% to 85% Non-condensing
• Operating Altitude: 2.4 km
• Storage Altitude: 4.6 km