Symbol Technologies WS 2000 Switch User Manual


 
Command Line Interface Reference 10-129
WS2000>admin(network.wlan)> set
Description:
Sets WLAN parameters.
Syntax:
set acl
<idx>
allow/
deny
Sets the default MU access control mode to allow or deny
for WLAN <idx>.
adopt
<idx>
allow/
deny
Sets default Access Port adoption to allow or deny for
WLAN <idx>.
auth
<idx> <type>
Sets the authentication type for WLAN <idx> to <type>
(none, eap, or kerberos).
Note: EAP parameters are only in effect if “eap”
is specified for the authentication method (set
auth <idx> <type>).
bcast
<idx>
enable/
disable
Enables or disables the broadcast ESS answer.
eap adv mu-quiet
<idx> <period>
Sets the EAP MU/supplicant quiet period for WLAN <idx>
to <period> seconds (165535).
mu-tx
<idx> <period>
Sets the EAP MU/supplicant TX period for WLAN <idx> to
<period> seconds (165535).
mu-timeout
<idx> <timeout>
Sets the EAP MU/supplicant timeout for WLAN <idx> to
<timeout> seconds (1255).
mu-retry
<idx> <retry>
Sets the EAP maximum number of MU retries to <retry>
(110) for WLAN <idx>.
server-
timeout
<idx> <timeout>
Sets the server timeout for WLAN <idx> to <timeout>
seconds (1255).
server-retry
<idx> <retry>
Sets the maximum number of server retries for WLAN
<idx> to <retry> (110).
server
<idx> <rsidx> <ip>
Sets the RADIUS server <rsidx> (1-primary or 2-second-
ary) for WLAN <idx> to IP address <ip>.
port
<idx> <rsidx> <port>
Sets the RADIUS server <rsidx> (1-primary or 2-second-
ary) for WLAN <idx> to <port>.
rad-acct mode
<idx> enable/
disable
Enables/disables RADIUS accounting for WLAN <idx>.
retry-count
<idx> <count>
Sets RADIUS accounting retry count to <count> (110) for
WLAN <idx>.
timeout
<idx> <time>
Sets RADIUS accounting retry timeout to <time> seconds
(1255). 0 indicates no timeout.
reauth mode
<idx>
enable/
disable
Enables or disables the EAP reauthentication parameters
for WLAN <idx>.
period
<idx> <period>
Sets the reauthentication period for WLAN <idx> to
<period> seconds (309999).
retry
<idx> <retry>
Sets the maximum number of reauthentication retries to
<retry> (199) for WLAN <idx>.