Filter
Top Products
WS 2000 Wireless Switch System Reference Guide10-20
WS2000>admin(network.ap)> set
Description:
Sets Access Port parameters.
Syntax:
set beacon mode enable/
disable
Enables or disables secure beacons.
intvl
<idx> <interval>
Sets the beacon interval for Access Port <idx> (1–12) to <interval>
in K-us (50–200).
ch_mode
<idx>
fixed/
random
Sets the channel mode for Access Port <idx> to fixed or random.
div
<idx> <mode>
Sets the default antenna diversity to <mode> (one of full,
primary, or secondary).
dtim
<idx> <period>
Sets the DTIM period for Access Port <idx> to <period> (number of
beacons from 1–50).
loc
<idx> <loc>
Sets Access Port <idx> location description to <loc> (1–13 charac-
ters).
name
<idx> <name>
Sets Access Port <idx> name to <name> (1–13 characters).
primary
<idx> <widx>
Sets the primary WLAN <widx> (the WLAN index from 1 to 4) for
802.11a radio associated with Access Port <idx>. The ESS ID con-
figured for this WLAN will be used in the 802.11a beacon as the
primary ESS.
Note: This parameter is used only for AP200 APs with
802.11a radios
rate
<idx> <basic> <supported>
Sets Access Port <idx> basic and supported rates. <basic> and
<supported> must be comma-separated lists of rates, such as
6,9,11,15 with no spaces. Basic rates are a subset of supported
rates. The different types of radio support the following rates.
A - 6|9|12|18|24|36|48|54
B - 1|2|5.5|11
G - 1|2|5.5|6|9|11|12|18|24|36|48|54
Note: For a G radio, basic rates must be a subset of B
Rates in order to associate legacy B stations.
reg
<idx> <indoor> <ch> <pwr>
Sets Access Port <idx> regulatory parameters, which <indoor> is
one of in or in/out; <ch> is the channel to use, and <pwr> is the
power (in dB from 4 to 20). Select the value of <ch> from the appro-
priate list.
802.11b ch -- 1 to 14
802.11a ch -- 36,40,44,48,52,56,60,64,149,153,157,161
Note: Regulatory parameter values depend on country of
operation and radio type. Refer to documentation for
regulatory information.
rts
<idx> <bytes>
Sets the RTS threshold for Access Port <idx> to <bytes> (e.g.,
2341).
short-pre
<idx>
enable/
disable
Enables or disables the short preamble mode for Access Port
<idx>.