Symbol Technologies WS 2000 Switch User Manual


 
WS 2000 Wireless Switch System Reference Guide8-14
View Statistics in Graphic Form
In the screens described by the previous sections of this chapter, the statistics for the WAN, LAN, WLAN, Access Ports, and
mobile units are presented in a tabular format. However, administrators often want to see the trends of the activity on the
LAN. To aid with that project, the WS 2000 Wireless Switch enables the administrator to view the statics in a graphical
format that is constantly updated.
Select [Status & Statistics] --> Statistical Graphs from the navigation menu on the left. The Graphical Display of
Statistics setup screen appears.
To create a graph that will remain on your screen until you close it, follow these steps:
1. Select the type of Entity (WAN, SUBNET, WLAN, AP, or MU) that you want to display from the menu.
2. Select the particular member that you want to watch from the Member menu.
3. Select the data to monitor. Depending on the selected entity type, one or more of four radio buttons will become
available to choose from. The radio button selection indicates what is being monitored (graphed on the X axis).
Selections can be one of:
Pkts If selected, the switch will monitor and graph packet traffic statistics. Select one or more of the
eight values to monitor, including: packets received and transmitted, received and transmitted
packets that were dropped, reception and transmission errors, and transmission and reception
overruns.
RF If selected, the switch will monitor radio frequency statistics. Select one or more of the different
RF values to monitor, including: signal, noise, and signal-to-noise ratio (SNR).