Symbol Technologies WS 2000 Switch User Manual


 
Status & Statistics 8-13
Mobile Unit (MU) Statistics
Each Access Port can have up to 32 associated mobile units. These units are listed in the Mobile Unit Access Control List of
the WLAN Security screen (Network Configuration --> Wireless --> <WLAN Name> --> <WLAN Name> Security.
To see a summary of the associated mobile units and general information about each unit, select Status & Statistics -->
MU Stats. The MU Stats Summary screen appears.
Field Description
IP Displays the IP address of the mobile unit.
WLAN Displays the WLAN with which the mobile unit is associated.
AP Displays the name of the Access Port with which the mobile unit is associated.
T-Put Displays the total throughput in Megabits per second (Mbps) for the mobile unit.
ABS Displays the Average Bit Speed (ABS) in Megabits per second (Mbps) for the mobile unit.
%NU Displays the percentage of the total packets for the mobile unit that are non-unicast packets. Non-uni-
cast packets include broadcast and multicast packets.
Retries Displays the average number of retries per packet. A high number in this field could indicate possible
network or hardware problems.
Detail Clicking MU Detail will launch a new window with detailed statistics about the selected mobile unit.
The MU Details screen is separated into four sections, MU Properties, MU Traffic, MU Signal, and MU
Errors. The MU Properties section displays basic information such as hardware address, IP address, and
associated WLAN and AP. The MU Traffic section displays statistics on RF traffic and throughput. The RF
Status section displays information on RF signal averages from the MU. The Error section displays RF
traffic errors based on retries, dropped packets and undecryptable packets.