Filter
Top Products
WS 2000 Use Cases 9-31
After specifying all of the subnet access rules, she clicks the Apply button to save her changes.
Configuring the Clients
Clarisa has now finished configuring the switch. Next she configures the wired clients.
Going to each device, she gives it the IP address and other networking information that it will need to communicate with the
switch:
Then she does the same thing with the wireless clients:
The remaining tasks are to test the network and to put the Access Ports in their permanent locations.
Client IP Address Subnet Mask Gateway WS 2000 Port
Wired POS terminal #1 192.168.0.4 255.255.255.0 192.168.0.1 4
Wired POS terminal #2 192.168.0.5 255.255.255.0 192.168.0.1 5
Server 192.168.0.6 255.255.255.0 192.168.0.1 6
Client type WLAN ESSID Wireless channel Authentication Encryption
Wireless POS terminals CCC-POS 3 802.1x EAP WPA-TKIP
Handheld terminals CCC-POS 3 802.1x EAP WPA-TKIP
Wireless printers CCC-Printers 7 None WEP