Filter
Top Products
Command Line Interface Reference 10-21
Example:
admin(network.ap)>set short-pre enable
admin(network.ap)>set shor 1 enable
admin(network.ap)>set name 1 BigOffice
admin(network.ap)>set dtim 1 25
admin(network.ap)>set loc 1 BigBldg
admin(network.ap)>show ap 1
ap name : BigOffice
ap location : BigBldg
ap mac address : 00A0F8565656
ap serial number : 00A0F8565656
ap radio type : 802.11 B
adopted by : WLAN1
ap indoor use : indoor/outdoor
ap channel : 1
ap radio power : 4 dB
antenna gain : 0 dBi
rf power : 3 mW
antenna type : external
ap diversity : full
basic rates : 1 2
supported rates : 1 2 5.5 11
rts threshold : 2341
beacon interval : 100
dtim period : 25
short preamble : enable
security beacon (hide ess) : disable
primary wlan index : wlan1
admin(network.ap)>
802.1x
<username> <password>
Sets the 802.1x username and password on AP 300 Access Ports.
Both parameters can be up to 64 characters.
detectorap
<idx>
enable/
disable
Enables/disables the Access Port <idx> as a rogue AP detector.
mac
<idx> <mac>
Sets the MAC network address of AP <idx> to <mac>
(XX:XX:XX:XX:XX:XX)