WS 2000 Wireless Switch System Reference Guide10-34
WS2000>admin(network.fw)> set
Description:
Sets firewall parameters. In the Web interface, this functionality is provide by the Network->Firewall screen.
Syntax:
Example:
admin(network.fw)>set mode enable
admin(network.fw)>set override disable
admin(network.fw)>set ftp enable
admin(network.fw)>set mime hdr 3000
admin(network.fw)>
admin(network.fw)>show all
Firewall Status : enable
Subnet Access Override : disable
Configurable Firewall Filters
ftp bounce attack filter : enable
syn flood attack filter : enable
unaligned ip timestamp filter : enable
source routing attack filter : enable
winnuke attack filter : enable
seq num prediction attack filter : enable
mime flood attack filter : enable
max mime header length : 34463
max mime headers : 3000
Always On Firewall Filters
set mode enable/disable Enables or disables the firewall.
override enable/disable Enables or disables subnet access override.
ftp enable/disable Enables or disables FTP bounce attack check.
ip enable/disable Enables or disables IP unaligned timestamp check.
mime filter enable/disable Enables or disables MIME flood attack check.
hdr
<count>
Sets the max number of headers as specified in <count> (with value in
range 12–34463).
len
<length>
Sets the max header length in bytes as specified by <length> (with
value in range 256–34463).
seq enable/disable Enables or disables sequence number prediction check.
src enable/disable Enables or disables source routing check.
syn enable/disable Enables or disables SYN flood attack check.
timeout
<time>
Sets the firewall timeout to <time> minutes (1–90).
win enable/disable Enables or disables Winnuke attack check.