Filter
Top Products
Switch Administration 7-7
4. When redundancy is selected as the operational state, in the Heartbeat interval field specify the amount of time
between heartbeat packets being sent or received between the two switches.
5. When redundancy is selected as the operational state, in the revert delay field specify the amount of time after not
receiving a heartbeat packet before the standby switch will take over.
6. Click Apply to save changes.
Redundancy Operations Status
To see the Operational Mode status for switch redundancy, look at the bottom of the Redundancy screen.
Updating the WS 2000 Wireless Switch’s Firmware
From time to time, Symbol will release updates to the WS 2000 Wireless Switch’s firmware. These updates will include:
• Information about how to communicate with newly released Access Ports
• Updates for security issues that have been identified
• Fixes to any software problems that have been identified
Checking for and Downloading Firmware Updates
The switch administrator should check for firmware updates for the WS 2000 Wireless Switch on a monthly basis, as
follows:
1. Select System Configuration --> Firmware Update or Network Configuration --> System Settings from the left
menu.
2. Examine the WS 2000 Version field to record the version number of the currently loaded software. It should be
something like 2.0.0.0-20