Filter
Top Products
WS 2000 Wireless Switch System Reference Guide5-16
5. Click Apply to save changes.
This screen also provides the ability to change several advanced settings for the Access Ports. For more information, see
Advanced Access Port Settings.
Setting Default Access Port Settings
The WS 2000 Network Switch can support up to six Access Port. These Access Ports can be either a 802.11a or 802.11b
radio type. When an Access Port associates with the wireless switch, the initial settings for that Access Port are taken from
the Default Access Port Setting for the appropriate radio type. Select Network Configuration --> Wireless --> Access
Ports to see the list of Default radio settings. Then select the Default settings screen for the appropriate radio type: one of
802.11a Defaults, 802.11b Defaults, or 802.11b/g Defaults.
Common Settings to All Radio Types
Some of the settings are common to all three radio types.
Placement
Select either Indoors or Outdoors from the Placement pop-up menu. This setting will affect the
power levels and channels available for selection.
Channel
Select a channel number from the Channel drop-down menu on which the Access Port should
communicate with associated MUs.
The available channels vary depending on the location setting of the
switch.