Filter
Top Products
WS 2000 Wireless Switch System Reference Guide8-4
The Information portion of the Subnet Stats screen displays general information about the subnet.
• The HW address is the Media Access Control (MAC) address of the switch’s WAN port, which is set at the factory.
• The IP addresses displayed here for the subnet connection are set on the subnet screen (Network Configuration -->
WLAN --> <subnet name>).
The Received and Transmitted portions of the screen display statistics for the cumulative packets, bytes, and errors received
and transmitted through the WAN interface since the WAN was last enabled or the switch was last rebooted.
Received Field Description
RX Packets
The total number of data packets received over the subnet
RX Bytes
The total number of bytes of information received over the subnet
RX Errors
The total number of errors including dropped data packets, buffer overruns, and frame errors on
inbound traffic
RX Dropped
The number of data packets that failed to reach the subnet
RX Overruns
The total number of buffer overruns (when packets are received faster than the subnet can handle
them)
RX Frame
The total number of TCP/IP data frame errors received
Transmitted Field Description
TX Packets
The total number of data packets sent over the subnet
TX Bytes
The total number of bytes of information sent over the subnet