Filter
Top Products
WS 2000 Use Cases 9-7
Clarisa clicks the Apply button to save her changes.
Clarisa leaves the rest of the System Configuration screens for now, moves to the left menu, and clicks on Network
Configuration so that she can begin to define the subnets.
The IP Address Plan
Subnets can be renamed, assigned an IP address, and have ports associated with them. Clarisa needs to plan how she is
going to assign IP addresses to the subnets and the devices on them.
Clarisa only has one IP address from corporate for this store. She will use network address translation (NAT) for all of the
devices, making request from those devices look to the outside world as if they came from the single static IP address that
she has. For the devices, she plans to use IP numbers from the range 192.168.*.*, because IP addresses in that range are
designated for internal use only.
She will assign them as follows:
Subnet IP Address Range
192.168.0.*** POS subnet
192.168.1.*** Printer subnet
192.168.2.*** Cafe subnet