Filter
Top Products
WS 2000 Use Cases 9-45
Configuring the WAN Interface
Setting Up Network Address Translation
After entering the IP addresses for the WAN interface, Leo clicks the toggle to the left of the WAN item in the left menu to
expand it. He then selects the NAT item. The WS 2000 displays the three IP addresses he entered when configuring the
WAN.
Each of these IP addresses will serve as the alias for all of the traffic from its corresponding subnet. That is, each IP address
will serve as the only alias for many internal-only IP addresses. Leo chooses 1 to Many in the pull-down menus to the right
of each IP number. As he does so, a 1 to Many Mappings button appears to the right of the pull-down menus, in the
Outbound Mappings column.