Filter
Top Products
Switch Administration 7-11
To Import Settings to a Local File
1. Click the Upload A File button in the HTTP Import/Export area to specify a configuration file name that can be specified
within the file system.
2. Type in the name of the file, or use the Browse button to find and select the file to import.
3. Once the upload is successful, click the Apply Uploaded File button to apply the new configuration to the switch.
Check the Status area in the lower portion of the window for any errors generated during the import process.
To Export Settings to a Local File
1. Click the Generate File button in the HTTP Import/Export area to specify a name for the configuration file.
2. Type in the name of the file. Use the Browse button to navigate to the desired directory.
3. Once the name is accepted, click the Download File button to write the configuration settings to the file.
4. After executing the export, check the Status field for messages about the success or errors in executing the specified
operation.
Sample Configuration File
All of the configuration settings for the WS 2000 Wireless Switch can be saved to a configuration file and then either
imported back into the same switch or transferred to another switch.
Below is a sample configuration file that has been annotated using comment lines. All comment lines begin with // and are
blue in color. The configuration file is organized by function area, and most areas correspond directly to a menu item.
//
// WS2000 Configuration Command Script
// System Firmware Version: 01.09-01
//
system
ws2000
// WS2000 menu
set name WS2000
set loc \0
set email \0
set cc us
set airbeam mode disable
set airbeam enc-passwd a11e00942773
set applet lan enable
set applet wan enable
set applet slan enable
set applet swan enable
set cli lan enable
set cli wan enable
set snmp lan enable
set snmp wan enable
/
system
config
// Config menu
set server 192.168.0.10
set user jhatashi
set enc-passwd 930f0c9f3c2c
set file cfg.txt