Filter
Top Products
WS 2000 Wireless Switch System Reference Guide7-28
3. Specify a Preferred Time Server, and optionally a First Alternate Time Server and a Second Alternate Time
Server by specifying the IP address and Port for the time service for each server. The default port is 123. The more NTP
servers specified, the greatest assurance there is of uninterrupted time synchronization.
4. Specify a Synchronization Interval (in minutes). By default, the switch will synchronize the time every 15 minutes.
5. Click the Apply button to save any changes made on this screen.
Setting Up and Viewing the System Log
The WS 2000 Network Management System keeps a log of the events that happen on the switch. The switch has a modest
of amount of memory to store events. If the administrator wishes to keep a more complete event history, the administrator
needs to enable a log server.
To view the log or set up a log server, select System Configuration --> Logs from the left menu.
Viewing the Log on the Switch
To save a log of the most recent events that are retained on the switch, click the View button. The system will display a
prompt asking for the administrator password. After the password has been entered, click the Get File button and a dialogue
will be displayed with buttons to Open or Save the log.txt file. Click Save and specify a location to save the file.
To view the saved log.txt file on a Microsoft Windows based computer use the WordPad application. Viewing the log file
with Notepad, the default text file view on most Windows based computers, will not properly display the formatting of the
log file.