Filter
Top Products
WS 2000 Use Cases 9-63
Leo clicks the Add button to add a VPN tunnel.
Now Leo specifies the network parameters for the tunnel. The Tunnel Name is simply a name by which to distinguish one
tunnel from another. Leo names the tunnel “Eng2EngAnnex.”
The Local Subnet is the subnet that will be networked over the VPN, in this case, the Engineering subnet. The Local WAN
IP is the IP address for the interface that this WS 2000 will show to the WS 2000 on the other side of the VPN. Leo enters
an unused, internal IP address, 192.168.24.198.