Filter
Top Products
WS 2000 Wireless Switch System Reference Guide9-8
And for each subnet:
WIth this plan, she can begin to configure the individual subnets
Configuring POS Subnet
Clarisa selects the first subnet from the LAN menu items in the left menu.
Clarisa renames this subnet “POSsn”, then gives the switch an IP address of 192.168.0.1 on that subnet and assigns a
subnet mask of 255.255.255.0. The devices on this subnet are:
• Everything on the POS WLAN: wireless POS terminals and wireless handheld terminals
• One wired POS terminal on port 4 and one on port 5
• One in-store server on port 6
Using the Interfaces section of the screen on the right, she associates the first WLAN with this subnet, as well as Ports 1
(the one the POS WLAN is plugged into), 4 and 5 (the wired POS terminals), and 6 (the server). She activates the DHCP server
and gives it an IP address range of 192.168.0.11 to 192.168.0.254.
After the Address Assignment Range is entered, Clarisa clicks Advanced DHCP Server.
192.168.**.1 The WS 2000 address on that subnet
192.168.**.2 to 192.168.**.10 Devices with static IP addresses
192.168.**.11 to 192.168.**.254 Devices with DHCP-supplied IP addresses