Filter
Top Products
Command Line Interface Reference 10-61
WS2000>admin(network.lan)> show
Description:
Shows the LAN parameters.
Syntax:
Example:
admin(network.lan)>show lan 1
subnet name : Subnet1
subnet interface : enable
ip address : 192.168.0.1
network mask : 255.255.255.0
ports : port1 port2 port3 port4 port5 port6
wlans : wlan1
admin(network.lan)>set name 1 NewName
admin(network.lan)>set port 4 none
admin(network.lan)>set wlan 2 s1
admin(network.lan)>show lan 1
subnet name : NewName
subnet interface : enable
ip address : 192.168.0.1
network mask : 255.255.255.0
ports : port1 port2 port3 port5 port6
wlans : wlan1 wlan2
admin(network.lan)>
show lan
<idx>
Shows the settings for the subnet <idx> (1–4).