Symbol Technologies WS 2000 Switch User Manual


 
WS 2000 Wireless Switch System Reference Guide9-48
Leo selects the Wireless item in the left menu. He sees that only the first wireless LAN is enabled. None of the WLANs
have the names he would like them to have. He clicks on the checkboxes to the left of WLAN2 and WLAN3, then on the
Apply button to enable these two WLANs.
Now that the WLANs are enabled, Leo needs to specify which Access Ports go with which WLANs.
He goes to the section labeled Access Port Adoption List and deselects the check boxes to the right of the row in which
the MAC address range is specified as ANY.
For the engineering WLAN, Leo selects the Add button, then enters a Start MAC value of 00:A0:F8:BB:FC:94 and an End
MAC value of 00:A0:F8:BB:FC:95. Leo selects the WLAN1 checkbox and makes sure that the other WLAN checkboxes are
not checked.
To specify the marketing WLAN, Leo clicks again on the Add button. In the new line, he enters the same MAC address,
00:A0:F8:BB:FC:96, for both the Start MAC and the End MAC. Leo selects the WLAN2 checkbox and makes sure that the
other WLAN checkboxes are not checked.
Finally, for the administration WLAN, Leo again clicks the Add button. He enters 00:A0:F8:BB:FC:97 as both the Start MAC
and the End MAC address. He selects the WLAN3 checkbox and makes sure that the other WLAN checkboxes for that row
are not selected.