WS 2000 Use Cases 9-47
Confirm Firewall Configuration
After setting the NAT ranges, Leo selects Firewall under WAN in the left menu. The WS 2000 displays a series of
Configurable Firewall Filters, all of which are currently enabled.
Leo examines the list and sees no reason to turn off any of the filters. He clicks the Apply button.
The next step is to determine which Access Ports each WLAN will use.
Adopting Access Ports
Now that the LAN and WAN interfaces are configured, Leo needs to specify which Access Ports will go with which wireless
LANs (WLANs). To do this, Leo needs the MAC address for each Access Port. He removes them from their packaging and
finds that they have consecutive MAC addresses: 00:A0:F8:BB:FC:94 through 00:A0:F8:BB:FC:97. He decides that he will
install them as follows:
He marks each Access Port with its intended location and WLAN, so he will not get confused later.
MAC Address Location WLAN Adoption List Label
00:A0:F8:BB:FC:94 Engineering offices Engineering WLAN1
00:A0:F8:BB:FC:95 Demonstration room, engineering area Engineering WLAN1
00:A0:F8:BB:FC:96 Sales and marketing area Marketing WLAN2
00:A0:F8:BB:FC:97 Administration area Admin. WLAN3