Filter
Top Products
Command Line Interface Reference 10-31
WS2000>admin(network.dhcp)> set
Description:
Sets parameters for automated firmware and configuration upgrades.
Syntax:
Example:
admin(network.dhcp)>show all
Auto Firmware upgrade flag : 0
Auto Config upgrade flag : 0
Interface : w
admin(network.dhcp)>set firmwareupgrade 1
admin(network.dhcp)>set con 1
admin(network.dhcp)>set inter s1
admin(network.dhcp)>show all
Auto Firmware upgrade flag : 1
Auto Config upgrade flag : 1
Interface : s1
Related Commands:
set firmwareupgrade 1 / 0 Enables (1) or disables (0) automatic switch firmware upgrade.
configupgrade 1 / 0 Enables (1) or disables (0) automatic switch configuration update.
interface
<int>
Sets the interface for the upgrades to <int>:
s1 – subnet 1
s2 – subnet 2
s3 – subnet 3
s4 – subnet 4
w – WAN
show all Shows the settings for all the automatic update parameters.