Filter
Top Products
WS 2000 Use Cases 9-15
After she makes this selection a new button appears, labelled “1 to Many Mappings”. She selects the “1 to Many
Mappings“ button.
If Clarisa had more than one static IP address, she would have been able to assign several to the WAN interface. This screen
would be used to choose how the internal IP addresses on each subnet translated into the selection of external IP addresses.
However, she has only one external IP address. All requests from any IP address on the store network will be translated into
a request using the single public IP address for the store.
Clarisa clicks the Ok button to confirm the mappings and then clicks the Apply button in the main screen to confirm the NAT
choices and save her choices on the switch.