WS 2000 Use Cases 9-39
Configuring the LAN
Leo clicks the toggle to the left of Network Configuration in the left menu. The tree expands and he selects the LAN item.
This screen shows the subnets, their IP addresses, and the network interfaces (the 10/100BaseT ports and the WLANs) that
are currently associated with each subnet. Only the first subnet is initially enabled, so Leo clicks on the check boxes to the
left of Subnet2 and Subnet3 to enable them. He clicks the Apply button to record his changes.
Next Leo needs to configure each of the subnets. He clicks the toggle symbol to the left of LAN in the left menu to expand it.