Symbol Technologies WS 2000 Switch User Manual


 
WS 2000 Wireless Switch System Reference Guide10-136
WS2000>admin(network.wlan.rogueap)> set
Description:
Sets rogue access point parameters.
Syntax:
Example:
admin(network.wlan.rogueap)>set apscan mode enable
admin(network.wlan.rogueap)>set apscan int 60
Related Commands:
set muscan mode enable / disable Enables or disables mobile unit scanning.
interval
<interval>
Sets the MU scan interval to <interval> (565535) minutes.
apscan mode enable / disable Enables or disables AP scanning.
interval
<interval>
Sets the AP scan interval to <interval> (565535) minutes.
detscan mode enable / disable Enables or disables detector AP scanning. For this feature to be fully func-
tional, you must also set one of the Access Ports as a detector AP. See the
WS2000>admin(network.ap)> set command.
interval
<interval>
Sets the detector AP scan interval to <interval> (565535) minutes.
show Displays the rogue AP parameters.