Filter
Top Products
Command Line Interface Reference 10-183
WS2000>admin(system.config)> update
Description:
Performs a firmware update.
Syntax:
Example:
admin(system.config)>set fw file mf_01050000200B.bin
admin(system.config)>set fw path /tftp/myadmin/
admin(system.config)>update tftp s1
update tftp/
ftp
<iface>
Sets how firmware updates will occur. Select between ftp and tftp .
<iface> specifies the interface (location), as follows:
s1 = subnet1
s2 = subnet2
s3 = subnet3
s4 = subnet4
w = wan
Note: Before using this command, use set server to set the IP address for the FTP/
TFTP server. If using the ftp mode, also use set user and set passwd to allow login
to the FTP server.
cf Indicates that firmware updates will occur from the switch’s compact flash slot. (Undoes an ftp/
tftp setting.)