Command Line Interface Reference 10-27
WS2000>admin(network.ap.default)> show
Description:
Shows the default Access Port parameters for a particular radio type.
Syntax:
Example:
admin(network.ap.default)>set ch_mode 802.11a fixed
admin(network.ap.default)>set dtim 802.11a 10
admin(network.ap.default)>set short 802.11b/g enable
admin(network.ap.default)>show default 802.11a
ap indoor use : indoor/outdoor
ap channel : 149
ap channel mode : fixed
ap radio power : 4 dB
power to antenna : 3 mW
ap diversity : full
basic rates : 6
supported rates : 6 9 12 18 24 36 48 54
rts threshold : 2341
beacon interval : 100
dtim period : 10
short preamble : disable
security beacon (hide ess) : disable
primary wlan index : wlan1
admin(network.ap.default)>
Related Commands:
show default Shows the default Access Port parameters.
set Sets the default parameters for the specified radio type.