Filter
Top Products
Command Line Interface Reference 10-57
WS2000>admin(network.fw.submap)> set
Description:
Sets a default subnet access rule to allow or deny communication.
Syntax:
Example:
admin(network.fw.submap)>set default s2 w deny
admin(network.fw.submap)>show default s1
-----------------------------------------------------------------------------
wan subnet1 subnet2 subnet3 subnet4
-----------------------------------------------------------------------------
allow allow allow allow deny
admin(network.fw.submap)>
set default
<from> <to>
deny/allow Creates a default subnet access rule to deny or allow communication <from> one of
the subnets (one of s1 = subnet1, s2 = subnet2, s3 = subnet3, s4 = subnet4) and
<to> is a destination (one of s1 = subnet1, s2 = subnet2, s3 = subnet3, s4 = subnet4,
w = the WAN).