Filter
Top Products
WS 2000 Wireless Switch System Reference Guide10-88
WS2000>admin(network.wan)> show
Description:
Shows the WAN parameters.
Syntax:
Example:
admin(network.wan)>show ip 3
wan interface : enable
ip address : 0.0.0.0
network mask : 0.0.0.0
default gateway : 192.168.24.1
dhcp mode : enable
primary dns server : 209.142.0.2
secondary dns server : 209.142.0.218
admin(network.wan)>show pppoe
pppoe mode : enable
pppoe keepalive mode : disable
pppoe authentication type : chap
pppoe idle time : 600
pppoe user name : JohnDoe
pppoe password : ********
show ip
<idx>
Shows the general IP parameters for the WAN along with settings for the WAN interface associated
with <idx> (where <idx> is in the range 1–8).
Note: If the WAN interface IP addresses have not been specified for <idx>, the IP and
Mask values will be shown as 0.0.0.0.
pppoe Shows all PPPoE settings.