Filter
Top Products
Appendix C Control Panel Menu Functions
125
Config Menu
The Config Menu allows you to configure the Timeout, SleepTime, Port
Priority and Display functions.
Timeout
The Timeout function allows you to choose how long the printer will wait
after a break in data reception before it moves on to the next job. You can
set Timeout for 5 to 999 seconds (the default Timeout setting is 300
seconds).
The following example shows how to change the Timeout setting from
300 to 600 seconds.
Tray1: Letter
Ready
1. Check that Ready appears on the dis-
play and the DATA light is off.
Tray1: Letter
Not Ready
2. Press the ONLINE key to go offline.
Tray1: Letter
Test Menu
3. Press the MENU key to enter the
menu.
Tray1: Letter
ConfigMenu
4. Using the and keys, select Con-
figMenu.
Tray1: Letter
Timeout
5. Press the ENTER key to enter Con-
figMenu.
Tray1: Letter
Timeout = 300 *
6. Press the ENTER key to enter the
Timeout submenu. The display shows
the current setting.
Tray1: Letter
Timeout = 600
7. Using the and keys, select the
desired setting.