Filter
Top Products
153
Appendix E
Network Management
Overview
The Tally T8006e printers utilize a standard network interface and a
number of standard protocols for printing across the network.
Network Interface
The printer has a single port that accepts a standard RJ45 Ethernet
connector. The Ethernet port supports both 10baseT and 100baseTX
through automatic switching.
Supported Printing Protocols
Supported Management Protocols
Remote Network Management
Supported IP Configuration Protocols
Auto IP is supported. If the IP setting is set to Auto (Dynamic) without
DHCP/BOOTP server, the printer set IP address (169.254.xxx.xxx) by
itself.
TCP/IP
LPD, FTP, raw TCP (Port 9100, Port 9900)
IPX/SPX
LPD, FTP, raw TCP (Port 9100, Port 2501) and SMB
(NetBT) Print server mode (NDS and Bindery) for
NetWare 3.x, NetWare 4.x and NetWare 5.x.
Apple EtherTalk
SNMP
MIB II, Enterprise MIB
HTTP
To set the parameters using a Web browser.
DHCP
The printer obtains the IP address from a DHCP server.
BOOTP
The printer obtains the IP address from a BOOTP server.